AVENTICS速度计时器,安沃驰计时器资料
简单介绍
AVENTICS速度计时器,安沃驰计时器资料 ■ 压力调节器已被预调至3 bar。 ■ 可以用来扩展控制阀门。 介质温度范围+0°C / +50°C 环境温度范围 +0°C / +50°C
AVENTICS速度计时器,安沃驰计时器资料的详细介绍
AVENTICS速度计时器,安沃驰计时器资料
测量范围
大值. 59,9 s
防护等级 IP40
■ 只可使用经过 AVENTICS 公司许可的油,参见 “技术信息”章节中的内容。
■ only oil approved by AVENTICS is available, see the section "Technical Information".
■ The pressure regulator has been pre-adjusted to 3 bar.
■ Can be used to extend the control valve.
Medium temperature range + 0 ° C / + 50 ° C
Ambient temperature range + 0 ° C / + 50 ° C
Media compressed air
Particle size max. 5 μm
Oil content in compressed air 0 mg / m? - 0,1 mg / m?
The electrical connection of the valve is multi - core plug, type C
Test module for electrical connection with multi-pin plug, M12, 5-pin
■ The pressure regulator has been pre-adjusted to 3 bar.
■ Can be used to extend the control valve.
Medium temperature range + 0 ° C / + 50 ° C
Ambient temperature range + 0 ° C / + 50 ° C
Media compressed air
Particle size max. 5 μm
Oil content in compressed air 0 mg / m? - 0,1 mg / m?
The electrical connection of the valve is multi - core plug, type C
Test module for electrical connection with multi-pin plug, M12, 5-pin
介质压缩空气
颗粒大小 max. 5 μm
压缩空气中的含油量0 mg/m? - 0,1 mg/m?
阀门的电气连接多芯插头, C 型
测试模块的电气连接多芯插头, M12, 5-針
磁场
AVENTICS速度计时器,安沃驰计时器资料
小值 2 mT
测量范围
小值 0,001 s
如果速度传器(随机附带)装气缸筒上的话,能测量出以m/s为单位的活塞速度
■ 通过连接电插头或位置传感器(需另购),能够测量以ms为单位的循环时间。
■ 对所有 AVENTICS 的磁性活塞气缸都匹配。
小值 0,1 m/s 工作压力范围4 bar / 10 bar
环境温度范围+0°C / +50°C
■ 压力露点必须至少低于环境和介质温度15 °C,并且允许 的高温度为 3 °C。
防护等级:带接线盒IP65
暂载率100 %
工作电压DC 24 V
电压偏差 DC -10% / +10%
阀的电压公差-10% / +10%
材料:
测量范围
大值. 9,99 m/s
分辨率 0,01 m/s
精度(100%满量程) <± 0,5 %
测量范围
标准ISO 15407-1, 26 mm
制动尺寸27 mm
■ 压缩空气的油含量必须在整个使用寿命中保持不变。
外壳 聚酰胺
AVENTICS速度计时器,安沃驰计时器资料
相关产品
在线留言 |