美国MAC单电控电磁阀主要作用225B-111JA

美国MAC单电控电磁阀主要作用225B-111JA功耗 1.0W-24W；Inrush:33VA Holding:19.7VA 反应时间 24VDC(8.5W): 通电: 9ms 断电:4.8ms 220/50 通电: 5-11ms 断电: 5-11ms 线圈及泄漏量 防尘防线圈,如需防护等级为IP65请与工厂确认； 泄漏量100cm³/min

美国MAC单电控电磁阀主要作用225B-111JA
Fluid :Compressed air, vacuum, inert gases
Pressure range :Vacuum to 150 PSI
Lubrication :Not required, if used select a medium aniline point lubricant (between 180°F and 210°F)
Filtration :40 μ
Temperature range :0°F to 140°F (-18°C to 60°C)
Flow (at 6 bar, ΔP=1bar) :0.5 Cv
Leak rate :
Coil :General purpose class A, continuous duty, encapsulated
Voltage range :-15% to +10% of nominal voltage
Protection :Consult factory
Power :∼ Inrush : 33 VA Holding : 19.7 VA
= 1 to 24 W
Response times :24 VDC (8.5 W) Energize : 15 ms De-energize : 5 ms
120/60 Energize : 3-8 ms De-energize : 3-13 ms

美国MAC单电控电磁阀主要作用225B-111JA
技术参数：
介质 压缩空气，真空或惰性气体
压力范围 外先导：真空到150PSI； 内先导：25到150PSI
流量 常闭：1”(15.9Cv),1/2”(9.0Cv);3/4”(12.7Cv)
常开：1”(17.4Cv),1/2”(10Cv) ;3/4”(13.7Cv)
电压范围 正常电压的-15%到+10%
Notes:
The special version of the 200 Series designed for hazardous
locations has been approved by CSA for Class I, Groups B, C & D; Class II, Groups E, F &
G. Maximum rated fluid and ambient temperature is 40°C; maximum pressure is 150 p.s.i.
Approval is limited to certain common AC & DC
voltages which are those designated in the table above.
These valves are supplied without manual operators.
This version of the 200 Series can be supplied on the standard individual inline or the manifold
valve body assemblies. It can also be supplied as a pilot for
the 57, 58 and 59 Series (with special adapter plate # M-00012).
美国MAC单电控电磁阀主要作用225B-111JA