进口SMC有触点压力开关技术标准

进口SMC有触点压力开关技术标准配管方法 0 Rc1/4螺纹型微型开关负荷容量 1 微小负载型连接口径 02 Rc1/4指示灯追记号 - 无灯

进口SMC有触点压力开关技术标准

显示现在的压力状态、设定模式的状态、所选择的显
示单位、错误代码。
大缸径气缸或真空发生器等动作时，要消耗大量的空气，故供给压力会瞬时下降。
After the power is turned on,
the highest (lowest) pressure in the normal measurement can be detected and updated.
The maximum (lowest) pressure value can be displayed (maintained).
Low leakage. VCR®, Swagelok® connectors are available.
With quick connector (straight type, elbow type)
The back pipe, the next pipe.
The set value of the main side sensor can be copied to the side sensor.
可把主侧传感器的设定值复制到从侧传感器上。

进口SMC有触点压力开关技术标准
电源接通后，可检测、更新平时测定中的高(低)压力。
Up to 10 copies can be copied at the same time.
(Maximum transmission distance 4m)
Display the current pressure state, set the state of the mode, the selected display
Display unit, error code.
Large cylinder cylinder or vacuum generator and other operations,
to consume a lot of air, so the supply pressure will be instantaneous decline.
可显示(保持)高(低)压力值。
保持中，同时连续按 和 键1秒以上，则保持值可重新设定。
Hold, and press the key for more than 1 second, then the value can be reset.


进口SMC有触点压力开关技术标准