日本SMC机械式无杆气缸选择要点
简单介绍
日本SMC机械式无杆气缸选择要点无杆气缸里有活塞,而没有活塞杆的,活塞装置在导轨里,外部负载给活塞相连,动作靠进气。 磁耦式的运动是利用空心活塞杆内的永磁铁带动活塞杆外的另一个磁铁运动来实现的,因其在速度快,负载高时内外磁环易脱开,故使用没那么广泛,其负载质量的大小需查找其质量与速度的特性曲线。故机
日本SMC机械式无杆气缸选择要点的详细介绍
日本SMC机械式无杆气缸选择要点
产品原理:
活塞杆上少量的横向CAD流量特消耗功率W)真空可使用
对应0603芯片 响应速度:13msec (500mm
Trunnion type cylinder: by installing
trunnion, can swing cylinders, rodless
ear into the shaft, the lever and the intermediate shaft trunnion ear. .
脚座型气缸:通过L型叫做进行安装
法兰型气缸:通过法兰进行安装分杆侧法兰安装无杆侧法兰安装
耳环型气缸:通过耳环进行安装
ylinder earrings: earrings through instal
ation, can swing cylinders, divid
ed into single earrings, earrings and double and one ear.
可以实现气缸的摆动,分为单耳环、双耳环和和一体耳。
基本安装型气缸:利用气缸缸体上的螺纹或通孔等进行安装
Basic installation of cylinders: an air cy
linder or threaded through holes on the cylinder installation, etc.
Foot type cylinder: L type known by installation
Flanged Cylinder: through flange ins
tallation, sub-par side flange mounted,
日本SMC机械式无杆气缸选择要点
日本SMC机械式无杆气缸选择要点
产品原理:
活塞杆上少量的横向CAD流量特消耗功率W)真空可使用
对应0603芯片 响应速度:13msec (500mm
Trunnion type cylinder: by installing
trunnion, can swing cylinders, rodless
ear into the shaft, the lever and the intermediate shaft trunnion ear. .
脚座型气缸:通过L型叫做进行安装
法兰型气缸:通过法兰进行安装分杆侧法兰安装无杆侧法兰安装
耳环型气缸:通过耳环进行安装
ylinder earrings: earrings through instal
ation, can swing cylinders, divid
ed into single earrings, earrings and double and one ear.
可以实现气缸的摆动,分为单耳环、双耳环和和一体耳。
基本安装型气缸:利用气缸缸体上的螺纹或通孔等进行安装
Basic installation of cylinders: an air cy
linder or threaded through holes on the cylinder installation, etc.
Foot type cylinder: L type known by installation
Flanged Cylinder: through flange ins
tallation, sub-par side flange mounted,
日本SMC机械式无杆气缸选择要点
日本SMC机械式无杆气缸选择要点
相关产品
在线留言 |