YUKEN叠加阀MPW-01-2-40 榆次YUKEN叠加阀
如果你感兴趣的话,可以电话:021-39529839/39529829
产品名称:YUKEN叠加阀MPW-01-2-40 榆次YUKEN叠加阀
产品型号:MPW-01-2-40
产品厂商:上海乾拓贸易有限公司
简单介绍
YUKEN叠加阀MPW-01-2-40 榆次YUKEN叠加阀的详细介绍
YUKEN叠加阀MPW-01-2-40 榆次YUKEN叠加阀
1638-Grade 12. Use 25 μm or finer line filter.
输入信号0⇔ 供应压力・先導压力
order suitable ones selec
be paid to maintaining control over
阶跃响应特性 (阀芯位移)供应电源
ted from the table below. If
1638级12.使用25微米或更细的线路滤波器
DC48 V)频 率 Hz 输入信号: ±25 %
否则可能会导致故障,缩短了阀
After adjustment, be sure to tighten the lock nut.
If mounting bolts are necessary,
mounting bolts from other
companies are used, their
strength must be 8.8 or up ISOstandards.
Slacken the lock nut and turn the
flow adjustment screw cloc
kwise caused the flow rate to decrease
放大器:AMLS-C2-D48-※-10 14 MPa放大器AMLS-C2-
使用寿命保持污染NAS内的程度
YUKEN叠加阀MPW-01-2-40 榆次YUKEN叠加阀
相关产品
在线留言 |