DGS35-5LK01024，德国西克激光测距传感器

DGS35-5LK01024，德国西克激光测距传感器•传感器可以完全放入T型槽内，形成很好的保护 •同一原理，两种安装：适用于T型槽及C型槽 •适用于所有带C型槽的气缸或线型滑块

DGS35-5LK01024，德国西克激光测距传感器

1 sensor has 2 adjustable switch points, easy to install
• The same principle, two types of installation: for T-slot and C-slot
• It is easy to install from top to bottom
• Detection range: 0 ... 50mm (cylinder stroke: 0 ... 50mm)
• only one mounting slot is required
•IO-link版本可用
•1个传感器有2个可调的开关点，安装简单
•检测量程：0…50mm（汽缸行程：0…50mm）
•只需要一个安装槽
•电缆配置简单，节省安装时间和成本
DGS35-5LK01024，德国西克激光测距传感器

•快速、经济的气缸终端位置及气缸或夹具中部检测
• Cable configuration is simple, saving installation time and cost
• Can be installed from the top for easy assembly
• The sensor can be fully placed in the T-slot to provide good protection
• Can be installed from the top for easy assembly
•1个传感器有2个可调的开关点，安装简单
•同一原理，两种安装：适用于T型槽及C型槽
•槽内自顶向下方便安装
•检测量程：0…50mm（汽缸行程：0…50mm）
• The sensor can be fully placed in the T-slot to provide good protection
• The same principle, two types of installation: for T-slot and C-slot
• Suitable for all cylinders or linear sliders with C-slots
•传感器可以完全放入T型槽内，形成很好的保护
•可从顶部安装，方便组装
•传感器可以完全放入T型槽内，形成很好的保护
•同一原理，两种安装：适用于T型槽及C型槽
•适用于所有带C型槽的气缸或线型滑块
•自带平头紧固安装螺栓的一体化设计,
•不超过30mm外壳尺寸(23.
• Integral design with flat head fastening bolts,
• No more than 30mm shell size (23.
7 ~ 26.3mm '), easy to install in the short stroke cylinder
• The IO-link version is available
• 1 sensor has 2 adjustable switch points, easy to install
•只需要一个安装槽
•电缆配置简单，节省安装时间和成本
•可从顶部安装，方便组装
7~26.3mm')，易于安装在短行程气缸上
• Detection range: 0 ... 50mm (cylinder stroke: 0 ... 50mm)
• only one mounting slot is required
• Cable configuration is simple, saving installation time and cost
• Fast, economical cylinder terminal position and cylinder or jig middle detection
DGS35-5LK01024，德国西克激光测距传感器