SMC过滤减压阀设计及性能
简单介绍
SMC过滤减压阀设计及性能过滤减压阀可根据输出压力精度的要求选配高精度的减压阀;在使用过程中,压缩空气经过两级三段式过滤器去除压缩空气中的油、水、尘等杂质后,大大提高了减压阀膜片的使用寿命和调节压力的度;由于过滤元件使用寿命较长,在维护上可单独对过滤元件、减压元件进行修复,无需整体更换,大大节约
SMC过滤减压阀设计及性能的详细介绍
SMC过滤减压阀设计及性能
安装方便,可用托架安装或与现在的模块式过滤
气吸入阀芯关闭,主阀芯开启,VAC侧和SET侧接通,
SET侧的真空度增加,当设定弹簧的
ZSE30A-01-N-ML下图是SMC ARP系列直动式减压阀结构原理图。
与普通减压阀的主要区别是有常泄式溢流孔。
其稳压精度高,为0.001MPa。但存在微漏。有管式连接和模块式。.
The following figure is SMC ARP series of direct-acting precision valve structure schematic.
The main difference with the ordinary pressure reducing valve is often open type overflow hole.
Its high precision regulator, 0.001MPa. But there is a slight leak. Tubular co nnection and modular. The
SMC过滤减压阀设计及性能
Export pressure should not exceed 90% of im port pressure.
The output pressure must not exceed the maximum value of the set pressure.
2) Co nnect the piping to purge thoroughly.
3) The flow direction of the air is installed in the direction of the arrow and can not be installed.
4) the use of plastic materials, pressure relief valve, should avoid direct sunlight.
出口要压力不要超过进口压力的90%。输出压力不得超过设定压力的大值。
2)连接配管要充分吹洗。
3)空气的流动方向按箭头方向安装,不得装反。
4)使用塑料材质的减压阀,应避免阳光直射.
ARP3000-02 ARP3000-02G ARP3000-F02B ARP3000-02-X511
ARP3000-02B ARP3000-02G-R ARP3000-F02BG-R ARP3000-F02
ARP3000-02BG ARP3000-02-R ARP3000-N02BG ARP3000-02B-X511A
ARP3000-02BG-R ARP3000-02-X508 ARP568-011 ARP3000-02B-X524
ARP3000-02B-R ARP3000-02-X510 ARP568-018
SMC过滤减压阀设计及性能
安装方便,可用托架安装或与现在的模块式过滤
气吸入阀芯关闭,主阀芯开启,VAC侧和SET侧接通,
SET侧的真空度增加,当设定弹簧的
ZSE30A-01-N-ML下图是SMC ARP系列直动式减压阀结构原理图。
与普通减压阀的主要区别是有常泄式溢流孔。
其稳压精度高,为0.001MPa。但存在微漏。有管式连接和模块式。.
The following figure is SMC ARP series of direct-acting precision valve structure schematic.
The main difference with the ordinary pressure reducing valve is often open type overflow hole.
Its high precision regulator, 0.001MPa. But there is a slight leak. Tubular co
SMC过滤减压阀设计及性能
Export pressure should not exceed 90% of im
The output pressure must not exceed the maximum value of the set pressure.
2) Co
3) The flow direction of the air is installed in the direction of the arrow and can not be installed.
4) the use of plastic materials, pressure relief valve, should avoid direct sunlight.
出口要压力不要超过进口压力的90%。输出压力不得超过设定压力的大值。
2)连接配管要充分吹洗。
3)空气的流动方向按箭头方向安装,不得装反。
4)使用塑料材质的减压阀,应避免阳光直射.
ARP3000-02 ARP3000-02G ARP3000-F02B ARP3000-02-X511
ARP3000-02B ARP3000-02G-R ARP3000-F02BG-R ARP3000-F02
ARP3000-02BG ARP3000-02-R ARP3000-N02BG ARP3000-02B-X511A
ARP3000-02BG-R ARP3000-02-X508 ARP568-011 ARP3000-02B-X524
ARP3000-02B-R ARP3000-02-X510 ARP568-018
SMC过滤减压阀设计及性能
相关产品
在线留言 |