日本油研压力调节阀，YUKEN压力调节阀

日本油研压力调节阀，YUKEN压力调节阀内部泄油型（T）。 为了使压力调整时，松开锁紧螺母， To make flow rate adjustment,对于增加的压力，转动螺钉 顺时针方向旋转。请务必牢固后，再拧紧锁紧螺母

日本油研压力调节阀，YUKEN压力调节阀
使调整到压力。排水管线（Y端口）连接到油箱
从而获得稳定的压力设定值。同时，
clockwise. Be sure to re-tighten the lock nut firmly
after the adjustment of the flow rate is completed.
Design Standards: None
先导控制电磁换向阀 可以组合使用，该阀必须是
Petroleum base oilsSynthetic fluids
Water containing fluids
Use fluids equivalent to ISO VG 32 or VG 46.
Use phosphate ester or polyol ester
Japanese Standard "JIS" and European Design Standard
This item applies only to External
Pilot or External Drain Ty pe.
only "None: Internal Pilot-Internal
 Drain Ty pe" is available for MPW (for "A&B-Lines").
日本油研压力调节阀，YUKEN压力调节阀
loosen lock nut and
turn the flow adjustment screw clockwise or a
fluid. When phosphate ester
fluid is used, prefix "F-"
to the model number because the
special seals (fluororubber) are required to be used.
A37-F-R-01-B-K-32
A37-F-R-01-H-K-32
A37-L-R-01-C-K-32
A37-L-R-01-B-K-32
A37-L-R-01-H-K-32
A37-F-R-01-C-S-K-32
A37-F-R-01-B-S-K-32
A37-F-R-01-H-S-K-32
A37-L-R-01-C-S-K-32
A37-L-R-01-B-S-K-32
A16-L-R-01-H-K-32
A16-F-R-01-C-S-K-32
A16-F-R-01-B-S-K-32
A16-F-R-01-H-S-K-32
A16-L-R-01-C-S-K-32
A16-L-R-01-B-S-K-32
A16-L-R-01-H-S-K-32

日本油研压力调节阀，YUKEN压力调节阀