纽曼蒂克先导式电磁阀,ASCO产品系列
简单介绍
纽曼蒂克先导式电磁阀,ASCO产品系列适用介质:气体、液体介质温度:-200~+350℃介质粘度:小于50CSt(大于时需定制)防护性能:IP65阀门材质:304、316 、316SS、316L控制方式:常开、常闭
纽曼蒂克先导式电磁阀,ASCO产品系列的详细介绍
纽曼蒂克先导式电磁阀,ASCO产品系列
特殊材质 - 以下的隔膜可
被取代的换能器体材料的铝,
黄铜,聚酯和不锈钢。如需订购,替换
下面材料代码,在换能器的第七位数字
目录编号,例如,一个可选氟橡胶膜片TF10A11
压力缓冲器 - 压力缓冲器(1/4“NPTF
1/4“NPTM)安装在传感器压力连接
会挫伤压力尖峰值不会
造成损坏。它包括与身体的多孔金属盘
的不锈钢,通过该流体通过。如需订购,
选择一个缓冲与流体兼容。可通过
单独的目录编号(见下表)。
Oxygen Cleaning – Pressure transducers for oxygen service
should be specially cleaned. They are degreased and blacklight
inspected, then assembled in a clean area and tested with
oil-free air or nitrogen. Use me tal body transducer with viton or
neoprene diaphragm and add suffix “H” to transducer catalog
number, e.g., TA40A13 becomes TA40A13 H .
Process Co nnection – A female process co nnection (1/4”
NPT) is standard on all pressure transducers. A 1/2” NPT is
available as an option on gauge pressure transducers. To
order, add suffix “B” to transducer catalog number, e.g.,
RF10A21 becomes RF10A21 B .
纽曼蒂克先导式电磁阀,ASCO产品系列
Note: Not available on nylon transducers.
Armored Capillaries – Double braided copper armor is
standard for copper capillary units. Stainless steel spiral
interlocked armor is available for stainless steel capillary
units. Add suffix “C” to transducer catalog number.
Thermal Well – Use with direct or remote sensors for
protecting sensing bulb. This allows removal of bulb while
maintaining a pressure-tight vessel. Available in 1/2” NPT or 3/4”
NPT process co nnection in brass or 316 SS. Dimensions are in
accordance with SAMA Std. RC17-9. Standard “U” dimension
(insertion length) is 2-1/2” for direct mount and 6’ capillary units
and is 4-1/2” for 12’ capillary units.
Lo nger Capillaries – Standard copper and stainless steel
capillary units can be furnished in 12’ lengths. To order, add
suffix “D” to transducer catalog number.
Co nsult ASCO for lo nger length capillaries.
unio n Co nnector – For use with remote units for mounting
of bulb in fluid being controlled. Available in 1/2” NPT and
3/4” NPT process co nnections in brass or 316 SS.
纽曼蒂克先导式电磁阀,ASCO产品系列
特殊材质 - 以下的隔膜可
被取代的换能器体材料的铝,
黄铜,聚酯和不锈钢。如需订购,替换
下面材料代码,在换能器的第七位数字
目录编号,例如,一个可选氟橡胶膜片TF10A11
压力缓冲器 - 压力缓冲器(1/4“NPTF
1/4“NPTM)安装在传感器压力连接
会挫伤压力尖峰值不会
造成损坏。它包括与身体的多孔金属盘
的不锈钢,通过该流体通过。如需订购,
选择一个缓冲与流体兼容。可通过
单独的目录编号(见下表)。
Oxygen Cleaning – Pressure transducers for oxygen service
should be specially cleaned. They are degreased and blacklight
inspected, then assembled in a clean area and tested with
oil-free air or nitrogen. Use me
neoprene diaphragm and add suffix “H” to transducer catalog
number, e.g., TA40A13 becomes TA40A13 H .
Process Co
NPT) is standard on all pressure transducers. A 1/2” NPT is
available as an option on gauge pressure transducers. To
order, add suffix “B” to transducer catalog number, e.g.,
RF10A21 becomes RF10A21 B .
纽曼蒂克先导式电磁阀,ASCO产品系列
Note: Not available on nylon transducers.
Armored Capillaries – Double braided copper armor is
standard for copper capillary units. Stainless steel spiral
interlocked armor is available for stainless steel capillary
units. Add suffix “C” to transducer catalog number.
Thermal Well – Use with direct or remote sensors for
protecting sensing bulb. This allows removal of bulb while
maintaining a pressure-tight vessel. Available in 1/2” NPT or 3/4”
NPT process co
accordance with SAMA Std. RC17-9. Standard “U” dimension
(insertion length) is 2-1/2” for direct mount and 6’ capillary units
and is 4-1/2” for 12’ capillary units.
Lo
capillary units can be furnished in 12’ lengths. To order, add
suffix “D” to transducer catalog number.
Co
unio
of bulb in fluid being controlled. Available in 1/2” NPT and
3/4” NPT process co
纽曼蒂克先导式电磁阀,ASCO产品系列
相关产品
在线留言 |